The Minimalistic Approach to the Installation of Kitchen Sinks

Installation of kitchen sinks is the perfect task for a beginner to undertake. They are easy and hassle-free installations, generally needing a few basic tools. It can be completed in a day, although the caulk may take a while to dry. The first thing you will want to do in the is taking a look at your existing sink and figuring out whether it is a top mount or an undermount.

Each type has its specifics:

• Top-mount sinks

The installation of this sink is simpler as it does not require extra cutting, the installation of kitchen sinks that are top-mounted is undertaken by lowering it on to the countertop and securing it in place.

• Undermount Sinks

Undermount sinks are inserted into the counter, unlike their counterparts. They are secured from below and may require some additional sizing efforts if your new sink does not measure the same as the hole in the counter.

Shutting off the water for the installation of kitchen sinks

You will want to begin by shutting off the water supply to the sink. The cold and hot water valves should be located under the sink or in the basement. In case you can’t find them, try these methods:

• Shut off the main water valve that supplies water to your entire house. It has a red handle, and you can find it by the water heater. If not, check outside the house.
• If the city supplies water to you, you will need to look for the water meter. Once you have located the water meter, use an adjustable wrench to shut off the water by twisting the valve near the usage gauge.
• If you cannot find your main water source valve, call your utility company for assistance

Removing the Pipes for the installation of kitchen sink

Once the water has shut off, drain the pipes and begin to remove the pipes underneath the sink. Put buckets underneath the exposed pipes to avoid making a mess

The water lines will be secured to the pipes by a metal connector. Use your wrench to free the connector by spinning counter-clockwise.

Tips:

1. Hold on to copper pipes while using the wrench to avoid twisting them
2. Do not leave any of the parts lying around carelessly, keep them in order

Removing the sink

Once you have removed the pipes, grab your utility knife and begun to cut the caulk around the edges of the sink’s rim and the counter-top. Take your time and go slow to avoid slipping.

• Once the blade can go straight in, you can pry off the old sink and set it aside.
• Wash the remaining caulk with soap and water, get it off as much as possible

The installation of the kitchen sink is halfway through!

Bring in your new top-mount sink and carefully lower it into its assigned space to see if it fits. If it does, you can go ahead and line the underneath of the sink’s rim with caulk and position it in place, securing it with caulk once more.

If your sink doesn’t fit, you will need to measure the dimensions once more and cut more space

Tools that you need for installation of kitchen sinks

This basic process only requires the tools mentioned below:

1. Screwdriver
2. Utility blade
3. Caulk (do not use plumber’s putty as it dries and cracks over time)
4. Protective covering

Installation of Kitchen Sinks in Toronto

To avoid future repairs, you could have a professional look over your handiwork to make sure your installation of kitchen sinks is as thorough as ours. For a personal Toronto-based opinion on your installation, swing by the Cheap Plumber Service website https://cheapplumber.ca.